User manual

MESSAGES
20
How to read a message again
1. Press to enter the List menu system.
2. Select
Messages and press SELECT
3. Select Inbox by pressing OK
4. Scroll through the list of messages and
confirm your choice by pressing
SELECT
How to send a message
Before you can send a message you have to enter
your network operator's telephone number for
this special service. Contact your network opera-
tor to obtain this number. On page 29 you can see
how you enter this special phone number and
how to select validity period, transmission format
etc. once for all. If you do not specify these para-
meters in the Setup menu system you will be
asked for a specification each time you wish to
send a message.
1. Press to enter the List menu system.
2. Select
Messages and press SELECT
3. Select New message by pressing OK
Start entering your message using the keypad in
the same way as you enter a name or a tele-
phone number in the phone book. moves the
cursor to the left, moves the cursor to the
right. Delete unwanted characters by pressing
CLEAR .
If you want to use the -symbol in your SMS
message press the -key briefly twice.
4. End your message by pressing
OK
5. Select whether you wish to
Send message
at once or whether you wish to
Save message
for sending it later on.
6. Confirm your choice by pressing
SELECT
Having selected Send message the phone
will ask for a phone number to send the message
to. Either enter a phone number or select one
from your phone book using
The message is automatically stored in
Outbox
under Messages in the List menu system.
How to edit an old message
1. Press to enter the List menu system.
2. Select
Messages and press SELECT
3. Select Inbox or Outbox by pressing
OK
4. Select the message you wish to edit
and confirm by pressing
SELECT
5. Press OPTION
6. Select Edit message and press OK
A digit between the scroll indicators on the
display indicates the number of the individual
messages.
GSM-COM 608 GB 28/04/99 12:30 Side 20