FLEXIDOME 5000 AN VDN-5085 en Installation Manual
FLEXIDOME 5000 AN Table of Contents | en 3 Table of Contents 1 Safety 5 1.1 Safety precautions 5 1.2 Important safety instructions 6 1.3 Connection in outdoor applications 7 1.3.1 Safety precautions 7 1.4 Important notices 8 1.5 FCC information 9 1.6 UL certification 10 1.7 Bosch notice 10 2 Introduction 11 2.1 Features 11 3 Installation 12 3.1 Unpacking 12 3.2 Disassembly 13 3.3 Mounting the unit 14 3.3.1 Mounting tips 15 3.3.2 Flush mounting 15 3.3.
en | Table of Contents FLEXIDOME 5000 AN 5.3 Day/Night switching 28 5.4 Camera control communication (Bilinx) 28 5.5 Main menu structure 29 5.5.1 Mode submenu 29 5.5.2 Exposure submenu 30 5.5.3 Day/Night submenu 32 5.5.4 Enhance / Dynamic Engine submenu 34 5.5.5 Color submenu 36 5.5.6 VMD submenu 37 5.5.7 Image Adjustment submenu 38 5.6 Install menu structure 39 5.6.1 Language submenu 40 5.6.2 Lens Wizard submenu 40 5.6.3 Synchronization submenu 41 5.6.
FLEXIDOME 5000 AN Safety | en 1 Safety 1.1 Safety precautions 5 DANGER! High risk: This symbol indicates an imminently hazardous situation such as "Dangerous Voltage" inside the product. If not avoided, this will result in an electrical shock, serious bodily injury, or death. WARNING! Medium risk: Indicates a potentially hazardous situation. If not avoided, this could result in minor or moderate bodily injury. CAUTION! Low risk: Indicates a potentially hazardous situation.
en | Safety 1.2 FLEXIDOME 5000 AN Important safety instructions Read, follow, and retain for future reference all of the following safety instructions. Heed all warnings on the unit and in the operating instructions before operating the unit. 1. Cleaning - Generally, using a dry cloth for cleaning is sufficient but a moist, fluff-free cloth or leather shammy may also be used. Do not use liquid cleaners or aerosol cleaners. 2.
FLEXIDOME 5000 AN 1.3 1.3.1 Safety | en 7 Connection in outdoor applications Safety precautions Coax grounding: If an outside cable system is connected to the unit, ensure that the system is grounded. U.S.A. models only: Section 810 of the National Electrical Code, ANSI/NFPA No.
en | Safety 1.4 FLEXIDOME 5000 AN Important notices Disposal - Your Bosch product was developed and manufactured with high-quality material and components that can be recycled and reused. This symbol means that electronic and electrical appliances, which have reached the end of their working life, must be collected and disposed of separately from household waste material. Separate collecting systems are usually in place for disused electronic and electrical products.
FLEXIDOME 5000 AN 1.5 Safety | en 9 FCC information FCC & ICES Information (U.S.A. and Canadian Models Only) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
en | Safety 1.6 FLEXIDOME 5000 AN UL certification Disclaimer Underwriter Laboratories Inc. ("UL") has not tested the performance or reliability of the security or signaling aspects of this product. UL has only tested fire, shock and/or casualty hazards as outlined in UL's Standard(s) for Safety for Information Technology Equipment, UL 60950-1. UL Certification does not cover the performance or reliability of the security or signaling aspects of this product.
FLEXIDOME 5000 AN Introduction | en 2 Introduction 2.1 Features 11 The FLEXIDOME 5000 Day/Night WDR camera is a small, discreet, surveillance dome containing a high-performance camera with integral varifocal lens. It uses a wide dynamic range 960H CCD sensor for outstanding picture performance. This surveillence dome can be mounted to an electrical box, to a wall, to a ceiling or in a corner. The sturdy construction and the high impact-resistant polycarbon dome protect the camera module from damage.
en | Installation FLEXIDOME 5000 AN 3 Installation 3.1 Unpacking Unpack carefully and handle the equipment with care. The packaging contains: – FLEXIDOME 5000 camera – Important safety instructions – Quick install instructions – CD-ROM – – Installation instructions – Adobe Acrobat Reader Plastic bag with mounting hardware (three SX8 4.
FLEXIDOME 5000 AN 3.2 Installation | en 13 Disassembly The flush-mount version consists of the following parts: Camera module and mounting base Inner liner (with sealing ring) Trim ring Dome Figure 3.1 Flush-mount The surface-mount version consists of the following parts: Bosch Security Systems Installation Manual AM18-Q0648 | v1.0 | 2013.
en | Installation FLEXIDOME 5000 AN Surface mounting box Camera module and mounting base Inner liner (with sealing ring) Trim ring Dome Figure 3.2 Surface-mount To disassemble the unit proceed as follows: 1. Use the special screwdriver bit to loosen the three tamperresistant screws in the trim ring (the screws remain in place). 2. Remove the trim ring and dome by pulling them from the base. 3. Remove the inner liner (with sealing ring) by pulling it off 4. Remove the pink protective foam.
FLEXIDOME 5000 AN Installation | en 15 If the unit is to be surface mounted, then use the Surface Mount Box (SMB). The SMB is sold as a separate item (VDA-455SMB) or is included with the unit with the surface mount option. Other mounting accessories are also sold separately. 3.3.1 Mounting tips – Use the mounting hole template to assist in marking the correct position for the camera to be mounted.
en | Installation FLEXIDOME 5000 AN Figure?3.4?Flush mounting - electrical box (4S) 1. 2. 3. 3.3.3 Two screws (not supplied) Integrated camera unit and base 4S electrical box Surface mounting When using the surface mounting box: – With a side connection, remove the cap covering the side entrance. With a rear connection, leave the cap in place. – Attach the conduit to the mounting box.
FLEXIDOME 5000 AN Figure 3.5 Installation | en 17 Surface mounting box VDA-455SMB Note: To ensure a watertight cable entry, use round cables of between 5 and 6 mm (0.2 - 0.24 inches) for power and video connection. Note: Use some silicon spray on the cable to help slide the grommets onto it. Figure?3.6?Surface mounting - side connection 1. Solid surface (pre-drill three 8mm holes and fit supplied 2. 3. 4. 5.
en | Installation 6. 7. FLEXIDOME 5000 AN Cables Conduit Figure?3.7?Surface mounting - rear connection 1. Solid surface (three pre-drilled 8mm holes and fit supplied 2. 3. 4. 5 6. 7. 8. plugs) Three screws (supplied with camera) Three screws (M5, supplied) Integrated camera unit and base Surface mounting box (VDA-455SMB) Cap (remove for side-entry cables) Conduit Cables AM18-Q0648 | v1.0 | 2013.
FLEXIDOME 5000 AN Connection and set-up | en 4 Connection and set-up 4.1 Power and video connections 19 The wiring harness has a BNC connector to accept the video coax cable (with male BNC connector) and two stripped low voltage power wires for connection to a power connector. A UTP adapter (VDA-455UTP) is available as an optional accessory to allow a UTP video cable to be connected to the BNC connector. The easiest way to connect the cables is as follows: 1.
en | Connection and set-up 4.2 4.2.1 FLEXIDOME 5000 AN Setting up the camera Camera positioning CAUTION! The Heater will be hot when in operation - Do not touch.Always switch the heater off when working on the camera, refer to Section 4.2.4 Heater, page 23 and Section 5.6.4 Connections submenu, page 41. To assist in setting up the camera, connect a monitor to the miniature 2.5 mm jack socket (2). This socket provides a composite video signal (with sync).
FLEXIDOME 5000 AN 3. 4. 5. 6. A. B. C. Connection and set-up | en 21 Thumbwheels Navigation buttons (5) Focal length Focus Pan-axis rotation Tilt-axis rotation Twist-axis rotation The physical default position of the camera is that the top of the image corresponds to the indication TOP. CAUTION! CCD image sensors are highly sensitive and require special care for proper performance and extended lifetime.
en | Connection and set-up FLEXIDOME 5000 AN Up key Menu/Select key (center) Right key Figure 4.2 – Navigation Down key Left key Press the menu/select (center) key to access the menus or to move to the next or previous menu. – Press the menu/select key for approximately 2 seconds to open the Install menu. – Use the up or down keys to scroll through a menu. – Use the left or right keys to move through options or to set parameters.
FLEXIDOME 5000 AN 4.2.3 Connection and set-up | en 23 Focal length and focus Before adjusting the focal length or focus, place the lens adjustment cap on the lens to ensure that the image sharpness is the same as when the dome is in place. 1. Connect a monitor or other display device to either the camera’s BNC connector or to the optional cable (S1460) on the monitor jack. (If S1460 is connected, there is no signal on the BNC connector.) 2.
en | Connection and set-up 4.2.5 FLEXIDOME 5000 AN Closing the unit When the camera position is set and all adjustments have been made, close the unit. 1. Place the inner liner (with attached sealing ring) in 2. Place the dome onto the base and rotate until it clips into position, aligning its fin with the bracket on the base. place. (If necessary clean its surface with a soft cloth.) 3. Place the trim ring over the dome. 4.
FLEXIDOME 5000 AN 5 Configuration | en 25 Configuration The camera normally provides an optimal picture without the need for further adjustments. Advanced set-up options are available in a menu system for getting the best results under special circumstances. The camera implements your changes immediately so that before and after settings are easily compared. 5.1 5.1.1 Menus Top level menus There are two upper level menus: a Main menu and an Install menu.
en | Configuration 5.1.2 FLEXIDOME 5000 AN Menu navigation Five keys are used for navigating through menu system. Up button Menu/Select button (center) Right button Down button Left button – Use the up or down keys to scroll through a menu. – Use the left or right keys to move through options or to set parameters. – When in a menu, quickly double-press the menu/select key to restore the selected item to its factory default.
FLEXIDOME 5000 AN 5.2 Configuration | en 27 Pre-defined modes There are six pre-defined modes with settings to make configuration easier. You can select one of the six pre-defined modes in the Install/Mode submenu. The modes are defined as follows; 1. 24-hour Default installation mode to provide stable pictures over a 24-hour period. These settings are optimized for out-ofthe-box installation. 2. Traffic Capture high-speed objects using default shutter in variable lighting conditions. 3.
en | Configuration 5.3 FLEXIDOME 5000 AN Day/Night switching The camera is equipped with a motorized IR filter. The mechanical IR filter can be removed in low-light or IR illuminated applications by software configuration settings. If Auto switching mode is selected, the camera automatically switches the filter depending on the observed light level. The switching level is programmable.
FLEXIDOME 5000 AN 5.5 Configuration | en 29 Main menu structure Item Selection Description Mode Submenu Sets up operating modes 1 to 6 Exposure Submenu Exposure control Day/Night Submenu Day/Night for color/mono operation Enhance Submenu Picture enhancement and performance Color Submenu White balance and color rendition VMD Submenu Video motion detection Image Submenu Sets up digital zoom or digital image Adjustment 5.5.
en | Configuration 5.5.2 FLEXIDOME 5000 AN Exposure submenu Item Selection Description ALC level -15 to +15 Selects the video level range. A positive value is more useful for lowlight conditions; a negative value is more useful for very bright conditions. Some ALC adjustment may improve scene content when Smart BLC is enabled. ALC speed Slow, medium, Adjusts the speed of the video level fast control loop. For most scenes it should remain at the default value.
FLEXIDOME 5000 AN Item Configuration | en Selection Actual shutter 31 Description Displays the actual shutter value from the camera to help compare lighting levels and optimum shutter speed during set-up. Gain control On, Fixed On - the camera automatically sets the gain to the lowest possible value needed to maintain a good picture. Fixed - sets Fixed AGC value. Maximum AGC 0 to 40 dB Selects the maximum value the gain or can have during AGC operation.
en | Configuration 5.5.3 FLEXIDOME 5000 AN Day/Night submenu Item Selection Description Day/Night Auto, Color, Auto - the camera switches the IR cut- Monochrome off filter on and off depending on the scene illumination level. Color - the camera always produces a color signal regardless of light levels. Monochrome - the IR cut-off filter is removed, giving full IR sensitivity. Switch level -15 to +15 Sets the video level in Auto mode at which the camera switches to monochrome operation.
FLEXIDOME 5000 AN Configuration | en Item Selection Description IR contrast Enhanced, Enhanced - the camera optimizes (mono) Normal contrast in applications with high IR 33 illumination levels. Select this mode for IR (730 to 940 nm) light sources and for scenes with grass and green foliage. Normal - the camera optimizes contrast in mono applications with visible light illumination.
en | Configuration 5.5.4 FLEXIDOME 5000 AN Enhance / Dynamic Engine submenu Item Selection Description Dynamic Off, Off: - turns off all automatic scene Engine XF DYNAMIC, detail and enhancements (only HDR, recommended for testing). Smart BLC XF DYNAMIC: - extra internal processing is enabled for enhancing the visibilty. HDR: - adds dual sensor exposure to the XF DYNAMIC features. In harsh lighting conditions, pixels from each exposure are mixed to give a more detailed image.
FLEXIDOME 5000 AN Item 3D-NR Configuration | en Selection Description 35 Off, Automatically reduces the noise in the Low, picture. Medium, This may cause some motion blur on High exceptionally fast moving objects immediately in front of the camera. This can be corrected by widening the field of view or lowering the selection value. 2D-NR Off, Automatically reduces the noise in the Low, picture. Medium, A high selection may cause blur.
en | Configuration 5.5.5 FLEXIDOME 5000 AN Color submenu Item Selection Description White balance ATW indoor, ATW - Auto tracking white balance ATW Outdoor, allows the camera to constantly ATW hold, adjust for optimal color Manual reproduction. ATW hold - Puts the ATW on hold and saves the color settings. Manual - the Red and Blue gain can be manually set to a desired position. Speed Fast, Adjusts the speed of the white Medium, balance control loop.
FLEXIDOME 5000 AN 5.5.6 Configuration | en 37 VMD submenu Item Selection Description VMD area Submenu Select 1 of the 4 areas to enter the area set-up menu to define the detection area. VMD mode Off, Silent, Off - Video Motion Detection (VMD) is OSD off. Silent - video motion generates silent alarm. OSD - video motion generates onscreen text message alarm. VMD 0 to 127 Sets the sensitivity for motion to the sensitivity desired level.
en | Configuration 5.5.7 FLEXIDOME 5000 AN Image Adjustment submenu Item Selection Description Digital Zoom x1, x2, x4, x8, Select the zoom factor x16 DIS Off, On EXIT AM18-Q0648 | v1.0 | 2013.03 Select On to stabilize the image. Returns to main menu.
FLEXIDOME 5000 AN 5.6 Configuration | en 39 Install menu structure Item Selection Description Language Submenu Select on-screen display (OSD) language Lens Wizard Submenu Select to optimize the focus point.
en | Configuration 5.6.1 FLEXIDOME 5000 AN Language submenu Item Selection Description Language English Displays the menus on the OSD in the Spanish chosen language. French German Portuguese Russian Simplified Chinese EXIT 5.6.2 Returns to Install menu. Lens Wizard submenu Item Selection Set focus now Description Select to fully open the iris. Follow the instructions for adjusting the focus for the lens.
FLEXIDOME 5000 AN 5.6.3 Configuration | en 41 Synchronization submenu Item Selection Description Synchroniza- Internal Internal - for free running camera tion Line lock operation. Line lock - to lock to the AC power supply Vertical phase 0, 1, … 359 Adjusts the vertical phase offset (when in LINE LOCK mode and a valid power supply frequency is detected). EXIT 5.6.4 Returns to Install menu.
en | Configuration 5.6.5 FLEXIDOME 5000 AN Test signal submenu Item Selection Description Show camera Off, On Select On to overlay the camera ID on ID the video test signal. Test pattern Color bars, Select the desired test pattern to help Raster, installation and fault-finding. Impulse, Cross Impulse, Crosshatch EXIT 5.6.6 Returns to Install menu. Camera ID submenu Item Selection Description Camera ID Enter a 17-character camera name.
FLEXIDOME 5000 AN Item Mode ID pos. Configuration | en Selection Description Off, Top left, Camera mode is displayed on the Top right, screen in the selected position. 43 Bottom left, Bottom right EXIT Bosch Security Systems Returns to Install menu. Installation Manual AM18-Q0648 | v1.0 | 2013.
en | Configuration 5.6.7 FLEXIDOME 5000 AN Privacy masking submenu Item Selection Description Mask 1 to 15 15 different areas can be masked. Black, Grey, Selects pattern for all masks. Pattern White, Noise Active On, Off Turns each of the masks on or off. Mosaic On, Off Turns mosaic on or off. Window Submenu Select to open a window in which to define the mask area.
FLEXIDOME 5000 AN 5.6.9 Configuration | en 45 Defaults submenu Item Selection Description Restore All No, Yes Restores all settings of the six modes to their default (factory) values. Select YES then press the Menu/Select button to restore all values. When completed the message RESTORED! is shown. Bosch Security Systems Installation Manual AM18-Q0648 | v1.0 | 2013.
en | Troubleshooting FLEXIDOME 5000 AN 6 Troubleshooting 6.1 Resolving problems The following table is intended to help you identify the causes of malfunctions and correct them when possible. Malfunction Possible causes Solution No image Defective camera. Connect a local monitor transmission to to the camera and check remote location. the camera function. Faulty cable connections. Check all cables, plugs, contacts and connections. Incorrect cable When using DC power connections.
FLEXIDOME 5000 AN 6.2 Troubleshooting | en 47 Customer service If you cannot resolve a fault, please contact your supplier or system integrator, or contact Bosch Security Systems Customer Service directly. The Installer should write down all information regarding the unit so that it can be referenced for warranty or repair. The version numbers of the firmware and other status information can be seen when the unit starts or by opening the Install menu.
en | Maintenance FLEXIDOME 5000 AN 7 Maintenance 7.1 Repairs CAUTION! Never open the casing of the camera. The unit does not contain any user serviceable parts. Ensure that all maintenance or repair work is performed only by qualified personnel (electrical engineering or network technology specialists). If in doubt, contact your dealer's technical service center. 7.1.1 Transfer and disposal The camera should only be passed-on together with this installation guide.
FLEXIDOME 5000 AN Technical Data | en 8 Technical Data 8.1 Specifications Type number Lens VDN-5085-3 VDN-5085-9 VDN-5085-A 2.8 to 10.5 mm 9 to 22 mm 18 to 55 mm F1.2 F1.4 F1.5 Sensitivity <0.06 lx <0.08 lx <0.09 lx (30IRE) <0.03 lx (mono) <0.04 lx (mono) <0.
en | Technical Data Test pattern FLEXIDOME 5000 AN Color bar, Raster, Impulse, Cross Impulse, Cross hatch generator Video Motion 4 areas, fully programmable Detection (VMD) Privacy Masking 15 independent areas, fully programmable; black, white, grey, noise E-zoom Up to 16x Digital Image On/Off Stabilizer Communication Two-way Bilinx (bi-directional) Languages English, Spanish, French, German, Portuguese, Russian, (OSD) Simplified Chinese Modes 6 programmable (preset) modes: 24-hour, Tra
FLEXIDOME 5000 AN 8.1.1 Technical Data | en 51 Dimensions 57.6 (2.27) 12 66.5 (2.62) 33.3 (1.31) 57.6 (2.27) 1 39.5 (1.56) 85 (3.35) ) 77 . (4 95 (3.7) 158 (6.22) Figure 8.1 Bosch Security Systems mm (in) Dimensions - Flush-mount Installation Manual AM18-Q0648 | v1.0 | 2013.
en | Technical Data FLEXIDOME 5000 AN 53.3 (2.1) 35 (1.38) 30.8 (1.21) 53.3 (2.1) 4.77) 130.5 (5.14) 121 ( 158 (6.22) Figure 8.2 AM18-Q0648 | v1.0 | 2013.
FLEXIDOME 5000 AN 8.1.2 Technical Data | en 53 Accessories – BNC to UTP transceiver – Surface Mount Box (SMB) – Pendant wall mount – Pendant ceiling mount – Corner mount – Bilinx communication interface box and software Contact a Bosch representative in your area for the latest available accessories or visit our website at www.boschsecurity.com Bosch Security Systems Installation Manual AM18-Q0648 | v1.0 | 2013.
en | Technical Data AM18-Q0648 | v1.0 | 2013.
Bosch Security Systems www.boschsecurity.
