Owner Manual

BOX EDGE PLUS

– HD DRAWERS

Borroughs Corporation – Storage Equipment Experts Borroughs.com | 1.800.748.0227 Borroughs Corporation – Proudly Manufactured in the U.S.A.

PRE-CONFIGURED DRAWERS

Borroughs offers a large number of standard pre-configured drawer interiors frequently ordered for small parts storage.

For simplicity, these Borroughs' drawers and interiors can be ordered as a complete, outfitted assembly using only

one part number. This provides the drawer, including the slide and handle/label holder, factory installed partitions with

essential dividers packaged together. This makes ordering quick and easy...and saves installation time, too!

DIVIDERS

Galvanized steel dividers subdivide the storage spaces between partitions or

partitions and drawer walls. Dividers simply drop into slots in partitions and

drawer walls making storage space adjustments quick and easy. Slots in

partitions and drawer walls are on 20mm (3/4" nominal) centers. Divider widths

are measured by the number of drawer wall slots the divider spans (i.e. a 4s

divider will span 4 slots). Dividers are available in heights to match partitions

and in 17 widths (refer to page 44). The 36" wide drawer has 39 slots and the

48" wide drawer has 54 slots.

PARTITIONS

Galvanized, slotted steel partitions create major drawer interior storage

spaces. Partitions slide into slots on drawer walls to span the full depth

of drawers–and, allow the addition of dividers to further subdivide the

drawer's interior.

HD DRAWERS, COMPONENTS & ACCESSORIES