Owner Manual

Borroughs Corporation – Storage Equipment Experts Borroughs.com | 1.800.748.0227 Borroughs Corporation – Proudly Manufactured in the U.S.A.

BOX EDGE PLUS

CORNER SPLICE, FIGURE 1

Corner Splice to be used on single row shelving row ends utilizing Angle Post.

The Splice mechanically attaches to front and side ﬂanges of the post, giving

support in two directions.

SPLICE PLATE AND BAR, FIGURE 2

Splice Plate and Bar to be used in all shelving utilizing Angle Post in

intermediate locations. Intermediate Splice Bar is used between two angle

post sides in conjunction with the Splice Plate on the front of two angle post

side-by-side.

SPLICE BAR/INTERMEDIATE BAR FIGURE 3

10 gauge bar to be used with Beaded Post, High-Rise Post and Angle Post

at all splice locations. Figure 3 showing Back-to-Back shelving Intermediate

location (4 required per location) Bar to be mechanically attached.

PART # Description

09545-099 Corner Splicer

09365-000 Splicer Bar

09366-000 Splicer Plate

Fig. 1 Corner Splicer

Fig. 2 Splice Plate & Bar

Fig. 3 Intermediate Splice Bar

Fig. 4 Row End Back to Back

Fig. 5 Beaded Post Slice Kit

Each Splice Bar, Splice Plate and/or Corner Splice MUST BE ORDERED separately.

Each Part# includes only one each except where noted by a KIT.

Double Row Shelving Double Row Shelving

1 2

Beaded Post units shown consisting of beaded post fronts and angle post backs

Single Row Shelving Single Row Shelving

Double Row Shelving Double Row Shelving

Unit Back

Unit Front

Unit Back

Fig. 5

Fig. 4

Fig. 3 Fig. 2 Fig. 1

ANGLE POST CORNER SPLICERS