Owner Manual

24
BOX EDGE PLUS
®
Borroughs Corporation – Storage Equipment Experts Borroughs.com | 1.800.748.0227 Borroughs Corporation – Proudly Manufactured in the U.S.A.
HIGH-RISE POST
SPLICER KIT
Provides front-to-back as well as
lateral support. High-rise posts are
joined with eight self-drilling screws
and four bolts with the upper post
resting on a 1⁄4" steel support
plate. This system produces a splice
internal to the high-rise post resulting
in a neat, finished appearance.
PART # SPLICE KIT
14928-000
High-Rise Post
Splicer Kit
Used to combine two posts. Often used to add on to the vertical size of an existing installation or when heights greater
than 20' (tallest one-piece post in the industry) are required.
CORNER SPLICER
PART # DESCRIPTION
09545-099
Corner Splicer
INTERMEDIATE
SPLICE BAR
PART # DESCRIPTION
09365-000
Intermediate Splicer
Bar (Quantity 1)
SPLICER PLATE
(SINGLE ROW INTERMEDIATE)
PART # DESCRIPTION
09366-000
Splicer Plate
(Quantity 1)
ROW END BACK-TO-BACK
SPLICE CONFIGURATION
PART # DESCRIPTION
09365-000
Splicer Bar
(Quantity 1)
BEADED POST
SPLICER KIT
The beaded post splicer consists of
a 1⁄4" steel plate at right angles to a
1" front plate which is attached with
self-threading screws. Also includes
splicer bar.
PART # SPLICE KIT
14934-000
Beaded Post Splicer
Angle Post Beaded Post
CATWALK BEAMS
Channel beams require no brackets, attach directly to post. Designed to give
maximum load bearing capabilities. Beams are available for angle and beaded
posts, in four lengths. Supports decking at same height as mezzanine bracket
and beam.
ANGLE POSTS BEADED POSTS
PART # WIDTH PART # WIDTH
10135-000
30"
10134-000
30"
10135-001
36"
10134-001
36"
10135-002
42"
10134-002
42"
10135-003
48"
10134-003
48"
POST SPLICERS
Fig. 1
on next page
Fig. 3
on next page
Fig. 4
on next page
Fig. 2
on next page
Fig. 5
on next page
12
GAUGE
STEEL
10
GAUGE
STEEL
13
GAUGE
STEEL
10
GAUGE
STEEL
13
GAUGE
STEEL
10
GAUGE
STEEL
14
GAUGE
STEEL
OR