Owner Manual

21
Borroughs Corporation – Storage Equipment Experts Borroughs.com | 1.800.748.0227 Borroughs Corporation – Proudly Manufactured in the U.S.A.
BOX EDGE PLUS
®
FIXED SHELF DIVIDERS
Flanged at top, bottom and back for added strength - shelf dividers provide a rigid partition between compartments.
Front edge has a 3⁄8" bead for extra ridigity and to protect hands. Attaches with push stud fasteners (included). For
additional fasteners use part number 47955-01.
PART # D x H PART # D x H
05599-807 12" x 6" 14374-000 18" x 16
1⁄2
"
05606-807 12" x 9" 05629-807 18" x 18"
05613-807 12" x 12" 05643-807 18" x 24"
05620-807 12" x 15" 05602-807 24" x 6"
05627-807 12" x 18" 05609-807 24" x 9"
05600-807 15" x 6" 05616-807 24" x 12"
05607-807 15" x 9" 05623-807 24" x 15"
05614-807 15" x 12" 05630-807 24" x 18"
05621-807 15" x 15" 05637-807 24" x 21"
05628-807 15" x 18" 05644-807 24" x 24"
05601-807 18" x 6" 05604-807 36" x 6"
05608-807 18" x 9" 05611-807 36" x 9"
05615-807 18" x 12" 05618-807 36" x 12"
05622-807 18" x 15"
SLIDING SHELF DIVIDERS
Snaps into place over front and rear
shelf flanges. Holds position firmly yet
slides easily along the shelf to allow
spacing changes to be made quickly.
Features a formed in label holder that
travels with the divider when parts are
rearranged.
ANGLE SHELF DIVIDERS
Flanged at bottom and punched for
attachment to shelves. Attaches with
push studs, adjustable on 2" centers.
PART # D x H
05490-842 12" x 1
1⁄2
"
05493-842 12" x 3"
05492-842 18" x 1
1⁄2
"
05495-842 18" x 3"
PART # D x H
14745-000 12" x 4
1⁄2
"
14745-004 12" x 6"
14745-001 15" x 4
1⁄2
"
14745-005 15" x 6"
14745-002 18" x 4
1⁄2
"
14745-006 18" x 6"
14745-003 24" x 4
1⁄2
"
14745-007 24" x 6"
DIVIDERS
SHELF SADDLE REINFORCEMENTS
Extending from side to side under center portion of shelf. Held in place by side
flanges of the shelf, this piece reinforces the shelf center and must be used
with shelf side supports.
PART # WIDTH
09610-097 36"
09610-096 42"
09610-095 48"
SHELF SIDE SUPPORTS
Used when shelf saddle is used in
conjunction with shelf brackets. Shelf
rests on top flange. May also be used
as a base strip on ends of rows of
open shelving
.
PART # LENGTH
09555-098 12"
09555-096 18"
09555-095 24"
09555-094 30"
09555-093 36"
22
GAUGE
STEEL
20
GAUGE
STEEL
22
GAUGE
STEEL
14
GAUGE
STEEL
11
GAUGE
STEEL