Owner Manual

19
Borroughs Corporation – Proudly Manufactured in the U.S.A.
BOX EDGE PLUS
®
SHELVING BACKS
Made of 24 gauge cold-rolled steel. For heights over 8'3", use combinations of
smaller sizes, overlapped in the middle, with a minimum of a 1" inch overlap.
Bolted to unit every 18" (typically).
PART # W x H PART # W x H
09551-099 24" x 7'3" 09550-096 42" x 6'3"
09547-097 36" x 3'3" 09551-096 42" x 7'3"
09548-097 36" x 4'3" 14867-096 42" x 8'3"
09549-097 36" x 5'3" 09547-095 48" x 3'3"
09550-097 36" x 6'3" 09548-095 48" x 4'3"
09551-097 36" x 7'3" 09549-095 48" x 5'3"
14867-097 36" x 8'3" 09550-095 48" x 6'3"
09547-096 42" x 3'3" 09551-095 48" x 7'3"
09548-096 42" x 4'3" 14867-095 48" x 8'3"
09549-096 42" x 5'3"
Often used when units must be
accessible from front and back,
precluding the use of back cross
braces. Furnished in pairs for both
angle and beaded posts.
PART #
10463-000
PART #
10462-000
CROSS BRACES (BACK & SIDES)
3⁄4" banded steel cross braces add structural rigidity to open-type
units. Available for sides and backs. All cross braces attach on 30"
vertical centers and are bolted in center.
PART # LENGTH Description
13826-000 24" Back Brace
13828-000 36" Back Brace
05017-815 42" Back Brace
05165-815 48" Back Brace
05019-815 12" Side Brace
05583-815 15" Side Brace
05020-815 18" Side Brace
13829-000 24" Side Brace
13830-000 30" Side Brace
10445-000 32" Side Brace
13831-000 36" Side Brace
BEADED POST FACE BRACEANGLE POST FACE BRACE
BACKS & BRACES
11
GAUGE
STEEL
11
GAUGE
STEEL
22
GAUGE
STEEL
12
GAUGE
STEEL