user manual

352 BES Developer’s Guide
Using the iastool command-line tools
listpartitions
Use this tool to list the partitions running on a specified hub, and optionally on
a specified configuration or management port.
Syntax
-listpartitions <-hub <hub> | -host <host>:<listener_port>>
[-cfg <configname>] [-mgmtport <nnnnn>] [-bare] [-realm <realm>]
[-user <username>] [-pwd <password>] [-file <login_file>]
Default Output
By default, the listpartitions tool displays the partitions running on a specified
hub, or displays the partitions running on a specified hub on a specified
configuration or management port.
Options
The following table describes the options available when using the
listpartitions tool.
Option Description
-hub <hub> Specifies the hub name for which you
want to list the running partitions.
-host <host>:<listener_port> Specifies the host name and the listener
port of the machine on which the
partitions you are interested in are
running. The option is enables the
iastool utility to locate a hub on a
different subnet than the machine on
which iastool is running.
-cfg <configname> Specifies the name of the configuration
on which to list partitions.
-mgmtport <nnnnn> Specifies the management port number
used by the specified hub. The default is
42424.
-bare Suppresses the output information, other
than the names of the running partitions.
-realm <realm> Specifies the realm used to authenticate
a user when the user and password
options are specified.
-user <username> Specifies the user to authenticate against
the specified realm.