User manual

18
TROUBLESHOOTING
TROUBLESHOOTING
TROUBLESHOOTING AND CONSUMER
INFORMATION
The vacuum cleaner does not start
1 Check that the cable is connected to the
mains.
2 Check that the plug and cable are not
damaged.
3 Check for a blown fuse.
The vacuum cleaner stops
1. Check whether the dust bag BORK Clinic is
full. If so, replace it with a new one.
2 Check whether the nozzle, tube or hose are
blocked.
3 Check whether the filters is blocked.
Water has entered the vacuum cleaner
It will be necessary to replace the motor at an
authorised service centre. Damage to the motor
caused by the penetration of water is not
covered by the warranty.
CONSUMER INFORMATION
BORK decline all responsibility for all damages
arising from any improper use of the appliance
or in cases of tampering with the appliance.
This product is designed with the environment
in mind. All plastic parts are marked for
recycling purposes.
BORK - VC SHB 9919 BK & VC SHB 918 18BORK - VC SHB 9919 BK & VC SHB 918 18 24.10.2006 11:45:0224.10.2006 11:45:02