User manual

BEFORE STARTING

1 Check that the BORK Clinic is in place.

2 Insert the hose until the catch clicks to

engage (press the catch to release the hose).

3 Attach the telescopic tube to the hose handle

and the floor nozzle (to disconnect, press the

lock button and pull apart).

4 The hose can easily be removed from the

handle by pressing the retaining button and

pulling out the hose.

5 Pull out the cable and plug it in. Press the

foot pedal to rewind the cable (take hold of

the plug to prevent it striking you).

6 Cleaners are fitted with an automatic cable

winder (Autoreverse). Pull out the cable and

plug it in. Move the control forwards to roll

the cable in and out as required. Move it

backwards to lock the cable in position once

it has been rolled out.

7 Press the On/Off button with the foot to start

the vacuum cleaner.

8 Adjust suction power using the suction

control on the vacuum cleaner.

421 3

ASSEMBLING VACUUM CLEANER & OPERATION

BORK - VC SHB 9919 BK & VC SHB 911 11BORK - VC SHB 9919 BK & VC SHB 911 11 24.10.2006 11:44:5924.10.2006 11:44:59