User`s guide

The Controls Window
65
- Press Shift-Control to round to the nearest 5 degrees.
- Press Shift-Control and use the mouse wheel to round to the nearest 45 degrees.
When tracking with a mouse wheel on dial controls, you can use the following
modifiers:
- Use the mouse wheel with no modifier keys to move in 1 degree increments.
- Press the Shift key and use the mouse wheel to round to the nearest 10 degrees.
- Press Control and use the mouse wheel to round to the nearest .1 degrees.
Resetting Values
All horizontal and vertical position controls have a Reset button to reset the position of the
object or attribute to the center of the frame.
Locking Values
When you want to keep parameter values equal when their settings are adjusted, you can
lock them. Scale X and Scale Y controls are locked by default to preserve the object’s aspect
ratio, and Crop settings are locked to achieve a crop of equal size on all sides.
A lock button appears next to the first of any set of parameters that are locked together.
When the lock icon is closed, adjusting any locked parameter adjusts all of the parameters to
which it is locked. When the lock icon is open, you can adjust each parameter independently.
Static Spline Checkbox
To prevent the spline from animating, in the Animation tab select the Static checkbox.
Alternatively, you can select the Animate/Static toggle button.