User`s guide

Chapter 10 Using Spline Media
564
Color Modulation Sets the color variation between Color A and Color B. The
choices in this menu are most functional when working with a
Wacom
® tablet.
• When None is chosen, only Color B is used.
• Pressure varies the color between Color A and Color B
depending on the amount of pressure applied to the pen as it
moves across the tablet. This choice is functional only with a
tablet.
• Velocity varies the color between Color A and Color B
depending on the rate that the brush moves across the
Composite window. When the brush moves slowly, Color A is
used; when the brush moves more quickly, Color B is used.
• Direction varies the color between Color A and Color B
depending on the direction that the brush moves across the
Composite window.
-When the brush moves from left to right, Color B is used.
-When the brush moves from right to left, Color A is used.
-When the brush moves from top to bottom or from bottom to
top, a blend of the two colors is used.
• Tilt varies the color between Color A and Color B depending
on the angle of the pen as it moves across the tablet. This
choice is functional only with a tablet.
• Bearing varies the color between Color A and Color B
depending on the direction of the pens tilt as it moves across
the tablet. This choice is functional only with a tablet.
• When Jitter is chosen, the color varies randomly between
Color A and Color B.
• When White Noise is chosen, each individual paint dab
receives a completely random value located between a
parameter’s A and B values. White Noise modulation is
similar to Jitter, where the values vary between the A and B
values, but are partially based on the adjacent dabs.
• When Length is chosen, the color varies dependent on the
value set in the Length Scale parameter.
• 1-Length produces the opposite results of Length.
Parameter Description