User`s guide

Working with the Motion Stabilizer
519
Crop Source Tab (Corner Pin Tracker)
The Crop Source tab lets you adjust the size of media in the Corner Pin Source track.
n
If you want to adjust the scale of the image, you should use these Scale parameters instead of
the Scale parameters in the Shape track’s Position Tab, since this filter performs its own
rendering.
Stabilize Direction menu Use for an image that is unstable on one axis but moving on
the other axis. The options include:
Any Direction. Stabilizes all motion.
X Only. Stabilizes the X axis of motion.
Y Only. Stabilizes the Y axis of motion.
Color
Specifies the color used to draw the average position of the
trackers. Requires the Search/Target tab set to
Draw/Average.
See “Working with the Corner Pin Tracker” on page 497 for
more information on the Draw Average parameter.
Scale X
Scale Y
Scale the rendered image after tracker data is applied.
If you want to adjust the scale of the image, you should use
these parameters instead of the Scale parameters in the
Shape tracks’s Position Tab, since this filter performs its
own rendering.
Parameter Description
Parameter Description
Crop Left, Crop Top, Crop Right,
Crop Bottom
Determine the width, in pixels, of the cropped area on
each edge of the image.
Edge Softness Softens the edge of the image.
• A value of 0 creates a hard edge.
• Increase this value increasingly to soften the edge of
the image.
Scale X,
Scale Y
Scale the rendered image after tracker data is applied on
the X and Y axis