User`s guide

Working with the Motion Stabilizer
507
Apply Tab (Motion Tracker)
The Apply tab allows you to apply the motion data created by the Motion Tracker filter.
Parameter Description
Apply Tracker Data
To menu
Select an option to apply the filter to the timeline.
The options include:
Position. Applies the result to the Position X and
Position Y of the Shape track. Position adjusts the
location of the shape.
Pivot. Applies the result to the pivot point of the
Shape track. The pivot point is the center around
which the shape pivots or rotates.
Camera. Applies the result to the Camera X and
Camera Y point of the Shape track. Camera X and
Camera Y set the position of the focal point of the
camera.
Light 1. Applies the result to the Light X and Light
Y Source of the Shape track. The source point sets
the location of the light.
2D Particles: Center. Sets the center point from,
toward, or around which the particles move when
Velocity type is set to Centripetal, Centrifugal,
Spiral CW, or Spiral CCW
.
2D Particles Advanced: Center. Sets the center
point from, toward, or around which the particles
move when Velocity type is Centripetal,
Centrifugal, Spiral CW, or Spiral CCW. Gravity
applies a secondary force to the particles’
movement.
Apply Tracker Data
To menu (continued)
3D Image Shatter: Center. Sets the center point
from, toward, or around which the particles move
when Velocity type is set to Centripetal,
Centrifugal, Spiral CW, or Spiral CCW. Gravity
applies a secondary force to the particles’
movement in addition to their normal velocities.