User`s guide

Chapter 7 Working with Shapes
388
Sphere Tab
Parameter Description
Wrap Percent Controls the extent to which the image wraps
around the shape.
A Wrap Percent of 100 wraps the image completely
around the sphere.
As you reduce the value, four things happen to the
physical model as follows:
• Radius gets larger
• Image is mapped on a smaller section of the 3D
shape
• Viewer’s eye moves further away
• Aspect ratio is adjusted toward the original
aspect ratio of the source
The overall affect is a gradual flattening of the
image as the sphere unwraps.
Front Opacity Controls the opacity of the image on the outside of
the sphere. You can use this setting to make the
outside of the sphere partially or fully transparent to
reveal an image on the inside.
• A setting of 100 makes the outside of the sphere
completely opaque.
• A setting of 0 makes the outside completely
transparent.
Wrap Percent=80
Wrap Percent=35