User`s guide

Applying Additional Shapes
357
Camera Tab (for 3D Extrusion Shape)
Position parameters (Camera Tab)
Parameter Description
Camera Model menu Determines the type of model is used to adjust the
camera perspective of the object. The menu choices
include the following:
• Position. Allows you to adjust camera
perspective—see Position parameters (Camera
Tab) on page 357.
• Orbit. Allows you to rotate the camera around
the object. In this camera model, the camera
points towards the object—see Orbit Parameters
(Camera Tab) on page 358.
• Pan. Allows you to pan the model camera along
the X axis—see Pan Parameters (Camera Tab)
on page 358.
All the choices include depth of field.
Depth of Field menu The menu choices include the following:
Off. Additional parameters do not appear.
On. Turns on additional parameters.
Parameter Description
Camera X, Camera Y,
Camera Z
Set the position of the focal point (the point on the
image plane at which the camera is pointed) of the
camera along the X, Y, and Z axis.
Distance Sets the model camera’s distance from the object.
Increase this setting to place the camera closer to the
object, exaggerating the perspective on portions of
the object that are closest to the camera.
Tumble, Spin, Rotate Rotate the focal point around the X, Y, and Z axes.
Tumble, Spin, and Rotate are animated over values
greater than 360° to make the focal point complete
more than one full revolution.