User`s guide

Chapter 7 Working with Shapes
352
Bump Map Tab
Parameter Description
Face Count menu Sets the number of different bump maps used in the
object.
The Face Count menu links to the Face Count menu
in the Bump Map and Textures tabs. When you set
this menu in any of these tabs, it updates in the other
tabs. However, the options that select the faces are
not linked.
The Face Count menu parameters include:
4. Applies material individually to each face.
3. Applies the same material to the Front and Back
faces and separate materials to the Bevel and
Extrusion.
2. Applies the same material to the Front, Back and
Bevel faces, and a different material to the
Extrusion.
1. Applies the same material to all four faces.
Front (FR), Back (BK),
Bevel (BV), or Extrusion
(EX) tabs
Click a tab to adjust the corresponding face.
Bump Height Determines the height of the bump map used to
create the texture.
Color On option Select to ignore the color values of the underlying
material and use the color values of the applied
bump map.
When this option is deselected, the color values of
the underlying material also set the color values of
the applied bump map. The bump map sets the
luminance values.