User`s guide

Working with 3D Shapes
333
Example 2 shows the Back Bevel turned on.
To add bevels and extrusions:
1. Select the Extrusion tab.
2. From the Extrusion menu, select a type of X and use the controls to set the thickness of
the extruded sides.
3. From the Bevel Type menu, select one of the following:
• Straight to create straight bevels.
• Convex to create bevels that curve outward.
• Concave to create bevels that curve inward.
4. From the Bevel Amount menu, select a type of X and use the Bevel Amount controls to
set the width of the bevels.
5. Use the Smoothness controls to adjust the number of polygons used to make up the
faces of the object.
Back Face Culling off
Back Face Culling on
Back Bevels on
Straight Bevel Type
Concave Bevel Type