User`s guide

Chapter 6 Working with Containers
304
Continuously Rasterize
option
Select to force the vector form of the chart to recalculate
based on parameter changes. Do not select this option if
using static charts.
Select the option to improve image quality in the
following situations:
• If you set the Scale parameters to scale the chart
larger than 100% size.
• If you use large negative Position Z values.
• If you set the Tumble or Spin parameters so that parts
of the chart appear very close to the viewer.
• If you rotate with a bevel or emboss style and you
want the highlight to recalculate accordingly.
Set up the effect with the option disabled to improve
preview performance. Then select the option as a final
step to improve the render.
Fade Allows you to gradually fade in successive bars, sections
or lines.
• Set to 100, each object appears suddenly and is fully
opaque.
• Decrease this value to create a more gradual effect, in
which each object fades on as its opacity increases.
Scale X
Scale Y
Adjust the starting size of the objects.
• The default value is 100, in which the object appears
on the screen full size.
• Decrease the value, the object appears to grow on the
screen.
Position X, Position Y,
Position Z
Adjust the position of the objects on the X, Y, and Z axes.
Tumble, Spin, Rotate Set the starting Tumble, Spin, and Rotate values for the
objects. Each object animates from its starting Tumble,
Spin, and Rotate values to its ending values as it appears
on screen.
Parameter Description