User`s guide

Working with 3D Chart Containers
301
Parameter Description
3D Style Select your choice of the 3D Style
Flat Uses the 3D Plane shape so it is two dimensional
Apply Current Spline Style
option
Lets you apply a Spline style from the Style Palette.
See Working with the Style Palette
Enable Border Select to apply a border to each bar, outside each pie
chart section, or around each area chart section.
Use the color swatch or eyedropper to set the color of the
border.
Borders do not apply to the Line Graph chart.
Border Width Sets the width, in pixels, of the border applied to the pie
chart sections, chart points, or area chart. At a value of 0,
the border is not visible.
Apply Current Natural Style
option
Lets you apply a Natural style from the Style Palette to
the front face of the chart.
Extruded Uses the 3D Extrusion shape so it is three dimensional.
Shape Depth Sets the thickness of the extruded sides.
Bevel Amount Sets the width of the bevels.
Apply Current Material Style
option
Select to apply a Material style from the Style Palette to
the front face of the chart. Open the Style Palette and
double-click a style in the Material tab.
See Working with the Style Palette on page 452.
Enable Back Bevels
option
Select to create bevels on the back face of the chart.
If this option is deselected, bevels are created only on the
front face. Leave this option deselected to speed
rendering time. If you cannot see the back of your chart,
you should leave this option deselected.