User`s guide

Using the PixelChooser
191
Contextual Controls
Avid FX supports contextual controls, so parameters that do not apply are dimmed in the
BCC PixelChooser tabs and labelled Unused.
For example, the Center X and Center Y parameters in the PixelChooser Region tab do not
have any affect if the Region Type menu is set to Distance to Edge, so they are labelled
Unused. When the Region Type menu is set to Distance to Point, the two parameters become
active and are labelled Center X and Center Y.
Working with PixelChooser Presets
After you apply a filter and adjust the BCC PixelChooser parameters, you can save and load
settings using the Preset menu in the BCC PixelChooser parameter group. Unlike the other
BCC presets which are only compatible with the filter in which they were created,
PixelChooser presets allow you to move parameters between filters. For example, you can
load a BCC PixelChooser preset created in the BCC Twirl filter into a BCC Glow Matte
filter.
See “Loading and Saving BCC Presets” on page 170.