User`s guide

Creating Media
107
Creating an Edge Gradient
The edge gradient combines the contour and bevel shapes to create a beveled pyramid effect.
The four colors of the pyramid sides move from the start to the end color blending inward
toward the center.
To create an edge gradient:
1. Add Fade by adjusting the width of the gradient between the edge colors (controlled by
Angle) and the middle color at the center of the frame. This value is measured as a
percentage of the size of the image.
2. Adjust the Angle to control the color of each beveled edge by setting the location of the
start color on the beveled edge.
Fade = 25
Fade = 75