User`s guide

Chapter 2 Working with Media
106
To create a contour gradient:
1. Adjust the Angle to control the width of the gradient between the edge colors.
2. Adjust the Fade to determine the width and the middle color at the center of the frame.
This value is measured as a percentage of the size of the image.
Creating a Bevel Gradient
The bevel gradient creates a beveled pyramid effect in which the four colors of the sides of
the pyramid move from the start to the end color.
To create a Bevel gradient:
• Adjust the Angle to control the color of each beveled side by setting the location of the
start color on the beveled sides.
Increase the angle to place the start color “between” the right and bottom bevels.
The right bevel color is increasingly affected by the middle color as the start color
moves towards the bottom bevel. At a value of 90, the start color is placed on the bottom
bevel, and so on.
Fade = 10
Fade = 90