Owners manual

#802400 SBC/SWP P/S Pump Bracket
1) If equipped, remove the two mounting studs from the back of the P/S pump.
2) Attach back half of the P/S bracket to the pump with two ¾” bolts and flat washers.
3) Attach the front piece of the bracket to the P/S pump with one ¾” bolt and flat washer.
4) Line up bracket front and back pieces and attach to the engine block with two 3-1/2” bolts and flat
washers.
Borgeson Universal Co., Inc.
9 Krieger Dr. Travelers Rest, SC 29690
www.borgeson.com
9/4/15
#802400 SBC/SWP P/S Pump Bracket
1) If equipped, remove the two mounting studs from the back of the P/S pump.
2) Attach back half of the P/S bracket to the pump with two ¾” bolts and flat washers.
3) Attach the front piece of the bracket to the P/S pump with one ¾” bolt and flat washer.
4) Line up bracket front and back pieces and attach to the engine block with two 3-1/2” bolts and flat
washers.
Borgeson Universal Co., Inc.
9 Krieger Dr. Travelers Rest, SC 29690
www.borgeson.com
9/4/15