Operation Manual

INSTALLATION
Important:
any adjustments, maintenance, etc. must be executed with the oven
disconnected from electricity.
To guarantee the proper functioning of the built-in appliance, the furniture unit must have
suitable characteristics:
- the panels adjacent to the oven must be constructed with heat resistant materials;
- in the case of veneered wood furniture units, the glue must be heat resistant to
temperatures up to 100°C;
The oven must be located in a standard opening of 560mm, as illustrated in Fig. 1, whether
under a counter or in a column position.
When inserting the oven into the column, in order to ensure sufficient ventilation it is
indispensable to make an opening of at least 85÷90 mm as shown in the picture below.
The oven is secured to the furniture unit by four “A” screws located in the holes of the
frame.
Make sure not to lift the oven by its door when inserting it. Furthermore, do not place
excessive pressure on the door when it is open.
8