Operation Manual

SELECTOR FUNCTIONS

GRILL (where one is present)

Function which only uses the upper heating GRILL element

The grill emits radiation which is similar to solar rays.

The radiated heat can be regulated by positioning the knob index at the desired temperature.

It is advisable to lightly oil the food, if it is meat or fish.

Insert the grill onto the available ledge. Keep the door closed.

This kind of cooking is especially suited to small amounts of food.

During cooking the light will stay on.

At the end of the cooking programme or by rotating the selector to the OFF position the light

will be switched off.

NOTE: Any condensation formed on the glass in the door, on the walls and the bottom of the

oven does not affect its functioning. It is advisable to dry the condensation after having

finished cooking.

Grill Light

When this orange light on the left of the GRILL selector comes on, it indicates that the oven is

switched on to the GRILL function. During cooking the light will stay on.

The light will be switched off at the end of cooking programme or by rotating the selector to

the OFF position.

NOTE if the light is flashing, it means that there has been a problem with the mains electricity

(blackout), please see the Alarm Codes Table.

STEAM COOKING

This cooking function only uses steam. During steam cooking, the steam from the boiler flows

into the cooking chamber. The steam heats the cooking chamber and cooks the food.

This cooking mode is ideal for cooking any type of vegetables, and it preserves the colour,

taste and above all the properties of the food.

Minimum chamber temperature 40°C maximum 100°C.

Steam Light

The steam light may give off red or blue(green) coloured light.

The blue(green) indicator shows that the oven is working in the steam function.

During cooking the BLUE (GREEN) light will stay on. At the end of the cooking or by rotating

the selector to the OFF position the light will be switched off.

If during cooking, the light turns red and flashes followed by a pause, it means that there are

alarm conditions, please see the Alarm Codes Table.