Operation Manual

54
GB
Once the cooking time is entered, the display will ash the current time again and
the “cooking time” symbol will be lit.
The countdown starts now. After the indicated cooking time has elapsed, the oven will beep and
the heating elements will turn o, ending cooking. The following words will appear on the display:
“Program nished remove the dish”: press any button to stop the beeping or open the door.
After 1 minute, the oven will automatically turn o, if other cooking functions have not been set.
Timer programming: end-of-cooking time
Touch the timer symbol two times and the
relative symbol will light up.
The separator does will ash to indicate
that you can set the end-of-cooking time.
Set the end-of-cooking time by touching
the “+” and “-” symbols.
Once the end-of-cooking time is entered, the display will ash the current time
again and the “end-of-cooking time” symbol will be lit.
The countdown starts now. When the set time has been reached, the oven will beep and the heating
elements will turn o, ending cooking. The following words will appear on the display: “Program
nished remove the dish”: press any button to stop the beeping or open the door.
After eight seconds, the oven will automatically turn o, if other cooking functions have not been set.
Timer programming: delayed cooking
By combining the two modes, “cooking time” and “end-of-cooking time”, you can program the oven
so that cooking starts later than the current time.
For example, if you want to go out at 8:30 and you want a roast to be ready when you return at 13:00,
do this: