Operation Manual

41
GB
Prepare the roast for cooking and put it in the oven.
Turn on the oven, select the cooking function and set the temperature.
Then set the cooking time, which we assume to be two hours.
Now, set the end-of-cooking time: the control normally adds
the cooking time to the current time, so it proposes an end-of-
cooking time, which in our case would be 10:30 (8:30+2:00).
Change the end-of-cooking time to what you want, in our example 13:00.
The oven goes to standby mode, turning o the oven light.
The control automatically turns the oven on at 11:00 (13:00-2:00) and turns it o at 13:00. The
roast will be ready when you return!
Programming the timer: minute-counter
The minute-counter is a function of the timer that is independent from the operation of the oven, i.e., it does not stop
cooking or turn o the oven but functions as an alarm.
You can set it at any time, such as to remind you when to check cooking on the burners, in addition to the oven, or for
other kitchen tasks.
It is even available when the oven is o and, in this
case, just touch the timer function symbol one time.
But, if you are using it with the oven on, you must touch
the time function symbol three times:
The separator dots ash to indicate that you can set
the time.
Touch the “+” and “-” symbols to set the minutes and