Operation Manual

56
Maintenance
Dismantling the Oven Door
It is easy to remove the door from your Boretti
RANGECOOKER0LEASEFOLLOWTHESEINSTRUCTIONS
Open the oven door completely. Move the fi tted
BRACKETSTOANUPRIGHTPOSITION&IG
Close the door halfway. Without using force,
PULLTHEDOORSLOWLYTOWARDSYOU&IG
Attaching the door is done in reverse order.
However, you must make sure that the little
slots underneath the bracket fi t onto the frame
of the range cooker. This may take some prac-
tice.
Removing the Inside Panels from the Oven
In order to remove the inside panels from the
oven, follow these steps:
sOPENTHEOVENDOORCOMPLETELY
sREMOVEALLRACKSANDBAKINGSHEETSFROMTHE
oven cavity
There are two large screws that you can
unscrew on the sides, after which the side pa-
nels can be easily removed.
Cleaning the Oven Cavity
Wait until the oven has cooled down complete-
ly, then clean it with lukewarm water and a mild
cleaning agent. Never use knives, steel–wool
pads or other abrasive products or objects for
cleaning purposes. This might damage the fi -
nish on the
inside of your oven. Make sure that food spills
are removed after every cooking session, in
order to prevent damage. An additional advan-
tage of regular cleaning is that there will be
fewer unpleasant odours the next time you use
the oven.
Fig. 3
Fig. 4