Operation Manual

48
GB
Change the end-of-cooking time to what you want, in our
example 13:00
The combimagnetron goes to standby mode, turning o the combimagnetron light.
The control automatically turns the combimagnetron on at 11:00 (13:00-2:00) and turns it o
at 13:00. The roast will be ready when you return!
Programming the timer: minute-counter
The minute-counter is a function of the timer that is independent from the operation of the combimagnetron, i.e.,
it does not stop cooking or turn o the combimagnetron but functions as an alarm. You can set it at any time,
such as to remind you when to check cooking on the burners, in addition to the combimagnetron, or for other
kitchen tasks.
It is even available when the combimagnetron is o and, in this case, just touch the timer function symbol one
time.
But, if you are using it with the combimagnetron on, you must touch the time function symbol three times:
The separator dots ash to indicate you can set the time.
Touch the “+” and “-” symbols to set the minutes.
The countdown starts now. After the indicated time passes, the over will and the dedicated symbol will ash:
press any button to stop the beep.
Programming the timer: cancelling the program
To cancel a program, you must set the previously assigned value to zero or turn on the combimagnetron.
TRADITIONAL COOKING FUNCTIONS
Circular heating element with fan. Thermostat setting from 50°C to MAX.
Large area grill. Thermostat setting from 50°C to MAX. Circular heating element with fan. Thermostat
setting from 50°C to MAX.
Double top heating element with fan (large area grill). Thermostat setting from 50°C to MAX.
Large area grill. Thermostat setting from 50°C to MAX.