Operation Manual

46
GB
Timer programming: cooking time
Touch the timer symbol once and the relative
symbol will light up. Plus, the clock display will
replace the current time:
The separator dots ash to indicate that you can
program the cooking time.
Once the cooking time is entered, the display will ash the current time again and the
“cooking time” symbol will be lit.
The countdown begins now. After the indicated time has elapsed, the combimagnetron will beep and the heating
elements, and cooking, will be turned o. The following words will appear on the display: “Program nished
remove the dish”: press any button to stop the beeping or open the door.
After one minute, the combimagnetron will automatically turn o, if other cooking functions have not been set.
Timer programming: end-of-cooking time
Touch the timer symbol two times and the relative
symbol will light up.
The separator does will ash to indicate that you
can set the end-of-cooking time.