Measurement Guide

Technical Evaluation Report (TER)

TER No. 1312-03 Page 9 of 9

Versetta Stone

Panelized Stone Veneer

Applications Using Continuous Insulation

Over Concrete or Masonry Walls

9.5.1.2. The Construction Documents shall be accurate and reliable and shall provide the location, direction

and magnitude of all applied loads and shall be in accordance with IRC Section R301 and IBC

Section 1603.

9.5.2. Construction Documents

9.5.2.1. Construction Documents shall be submitted to the Building Official for approval and shall contain the

plans, specifications and details needed for the Building Official to approve such documents.

9.6. Responsibilities

9.6.1. The information contained herein is a product, material, detail, design and/or application TER evaluated in

accordance with the referenced building codes, testing and/or analysis through the use of accepted

engineering practice, experience and technical judgment.

9.6.2. DrJ TERs provide an assessment of only those attributes specifically addressed in the Products

Evaluated or Code Compliance Process Evaluated sections.

9.6.3. The engineering evaluation was performed on the dates provided in this TER, within DrJ's professional

scope of work.

9.6.4. This product is manufactured under a third-party quality control program in accordance with IRC Section

R104.4 and R109.2 and IBC Section 104.4 and 110.4.

9.6.5. The actual design, suitability and use of this TER, for any particular building, is the responsibility of the

Owner or the Owner's authorized agent, and the TER shall be reviewed for code compliance by the

Building Official.

9.6.6. The use of this TER is dependent on the manufacturer’s in-plant QC, the ISO/IEC 17020 third-party

quality assurance program and procedures, proper installation per the manufacturer’s instructions, the

Building Official’s inspection and any other code requirements that may apply to demonstrate and verify

compliance with the applicable building code.

10. Identification:

10.1. Versetta Stone

described in this TER is identified by a label on the board or packaging material bearing the

manufacturer’s name, product name, TER number, and other information to confirm code compliance.

10.2. Additional technical information can be found at versettastone.com.

11. Review Schedule:

11.1. This TER is subject to periodic review and revision. For the most recent version of this TER, visit

drjengineering.org.

11.2. For information on the current status of this TER, contact DrJ Engineering.

 Mission and Professional Responsibilities

 Product Evaluation Policies

 Product Approval – Building Code, Administrative Law and P.E. Law