General Safety Instructions for Power Tools Using power tools of any kind can be dangerous ¥ safe operating procedures are not followed. Recognizing the hazards of each tool and using them with respect and caution will considerably limit the possibility of personal injury. However, if safety precautions are ignored, personal injury will likely resell, Always use common sense — your personal safety is your responsibility. 1. Know your power tool.
Congratulations You have just purchased a Bora® Portmanteau PM-4000 Folding Miter Saw Stand. This product has been specifically designed o assist you in the use of your 10-12" miter saw. Paris Figure 1 Description Part No.
Safety Instructions for Miter Saw Stands 1. Use caution when folding or unfolding legs to limit any finger pinch points, 2. Place stand on flat and level surface fo keep tool from rocking or tipping. 3. Make certain halt work support extensions are within sale operating limits, and are properly locked in place before using tool. Do not exceed 500 1bs. on main frame table. 4.
instructions for irregular Saw Mounting Holes Secure Offset Mounting Brackets as shown below. Note: Brackets can be used on the grant or rear of the Machine Mounts. To Order (f not included) Call: 1-868-588-0395 Kit No. J-104 Mounting Kit for Miter Saws andiron Ether Power LOCKED Tools with an inset Mounting Hole Pattern Figure 6 Parts List #3040 Offset Mounting Bracket € MB x 18mum Earrings Golf () €3 Wb Flat Washer (2 € M8 Hex Nut (2) Also Availability: Kit No.
Important Safety Warnings Read alt instructions before setup and use of this product. Recognizing the hazards of each workshop operation and proper attention to safety to anticipate problems wilt considerably limit the risk of personal injury. Always use common sense. Your personal safety is your responsibility. 1. Do not use this pedestal roller to support people or animals. Do not sit or sand on it 2. Keep children away. Never allow children to play with the pedestal roller. 3.
Operating Instructions Setting up the Pedestal Roller Stand properly is the key to safe use. This Stand is designed to safely support the maximum weight at the maximum height setting. Do not overload the stand. 1 LA Be sure the stand legs are fully opened and situated on a flat level surface. Ensure the stand height is set level 1o the bottom of the work piece for stability. Be sure that the adjustable handle Is fully tightened before using the stand.
