User Manual - 2

EN
16
Installation
www.bora.com
6 Installation
 Observe all safety and warning information
(see the Safety section).
INFO The device must not be installed above cooling
devices, dishwashers, stoves, ovens, washing
machines or dryers.
INFO The contact surfaces of the worktops and wall
sealing strips must be made of a heat-resistant
material (up to approx. 100 °C).
INFO Worktop cut-outs must be moisture-sealed using
suitable means and, where necessary, fitted with
a thermal insulator.
NFO Control knobs have to be connected only to the
provided connections of the cooktop extractor.
6.1 Checking the scope of delivery
 Check the scope of delivery to make sure everything
has been provided (see table (see Table 6.1 and 6.2).
 If there are any missing or damaged parts, please
notify BORA After Sales Service.
 Do not under any circumstances install parts which are
damaged.
 Dispose of transport packaging in the proper manner
(see the Decommissioning, disassembly and disposal
section).
Scope of delivery PKA
Name Quantity
Operating and installation instructions 1
Cooktop extractor 1
Height adjustment plate set 1
Mounting clamps 4
Control knob 1
Stainless steel grease filter 1
Filter tray 1
Maintenance tray 1
Cover flap 1
CAT 5 communication cable 1
Universal control unit 1
Power supply cable 1
Straight ducting piece 1
Control knob cable – interface/extractor 1000 mm 1
Tab. 6.1 Scope of delivery PKA
Scope of delivery PKAS, PKASAB
Name Quantity
Operating and installation instructions 1
Cooktop extractor 1
Height adjustment plate set 1
Mounting clamps 4
Control knob 1
Stainless steel grease filter 1
Filter tray 1
Maintenance tray 1
Cover flap 1
Power supply cable 1
Control knob cable – interface/extractor 250 mm 1
Tab. 6.2 Scope of delivery PKAS, PKASAB
6.2 Tool and aids
The following tools are required to correctly install the
cooktop extractor:

Pencil

Tape measure or metre rule

Standard or cordless drill with Forstner bit Ø50 mm

Black, heat-resistant silicone sealant

Flat screwdriver

Torx screwdriver size 20

Torx screwdriver size 10 (PKA only)