Installation and Operation Guide

Installation

www.bora.com

5.6.4 Exiting the configuration menu

 Twist the knob ring until the display shows

 Now press the touch surface on the control knob

again for 1 second to exit the configuration menu. The

display goes out and a beep sounds.

 Turn the knob ring to the 12 o’clock position.

appears in the display for 10 seconds. The display then

goes out with a beep.

INFO If no settings are changed in a menu or submenu

option for 2 minutes, the configuration menu is

closed automatically.

5.7 Sealing the devices

Fig. 5.24 Silicone sealant for ush installation

[1] black, heat-resistant silicone sealant

Fig. 5.25 Silicone sealant for surface mounting

[1] black, heat-resistant silicone sealant

 Once all of the installation work and initial operation is

complete, seal the devices all around with black, heat-

resistant silicone sealant (also between the cooktop

extractor and cooktop) [1].

 Make sure that no silicone sealant gets under the

cooktop.

5.8 Handover to user

Once installation is complete:

 Explain the main functions to the user.

 Explain all safety-related aspects of operation and

handling to the user.

 Adhere the supplied nameplate to the back of these

operating and installation instructions.

 Provide the user with the accessories and operating

and installation instructions to be kept in a safe place.