Installation and Operation Guide

Installation

www.bora.com

Connections on the cooktop

321

ZONE1 INTERF. COM1 ZONE2

Fig. 5.18 Control knob connection at the rear of the cooktop

[1] Connection of the front cooking zone control knob (zone 1)

[2] Connection of the automatic extraction system

[3] Connection of the rear cooking zone control knob (zone 2)

Standard cooking zone connection

5 4

Fig. 5.19 Standard cooking zone connection

[1] Cooktop

[2] Rear cooking zone (zone 2)

[3] Front cooking zone (zone 1)

[4] Rear cooking zone control knob (zone 1)

[5] Front cooking zone control knob (zone 2)

5.5.3 Installation rotated by 180°

 Rotate the cooktop 180°.

 For the installation, proceed as described above.

 Change the installation direction in the configuration

menu (see Configuration menu).

INFO If installation is rotated by 180°, then the

connections for the control knobs and the

extraction system are at the front.

INFO Cables of sufficient length are provided.

5.5.4 Establishing communication

The appliance components are linked by the ribbon cable

provided.

 Create the connection between the cooktop and the

control knobs.

 Create the connection between the cooktop and the

cooktop extractor.

Cooking zone connection

INFO According to the default settings, the left control

knob operates the front cooking zone and the

right control knob operates the rear cooking zone.

Connection on the control knob

Fig. 5.17 Connection on the rear of the control knob

[1] Connection on the rear of the control knob