Installation and Operation Guide

Installation

www.bora.com

Fig. 5.15 Cooktop and height adjustment plates

[1] Cooktop

[2] Height adjustment plates

 If applicable, insert the height adjustment plates [2].

Fig. 5.16 Mounting brackets

[1] Mounting bracket

[2] Washer

[3] Screw

[4] Screw (60 mm)



Fasten the cooktop using the mounting brackets [1].

Tighten the mounting brackets with the screws [3] and

[4] using the washer [2] with max. 2 Nm.

Verify that the alignment is correct.

≥70 ≥40

90 90 909090 196 196 196 196

370 370

370

110

1 1 1 1

110

Ø50 ±0,5

Fig. 5.13 Bore holes for 3 cooktops and 2 cooktop extractors

[1] Boreholes for socket (2x external)

[2] Bore holes for control knobs (8x)

[3] Cooktop (3x)

[4] Cooktop extractor (2x)

[5] Worktop

[6] Floor unit front panel

5.5.2 Installing the cooktop

321

Fig. 5.14 Insert cooktop

[1] Worktop cut-out

[2] Tepan stainless steel grill

[3] Connections for control knobs and automatic extractor

function

 Insert Tepan stainless steel grill [2] into the worktop

cut-out [1].

 Align Tepan stainless steel grill [2] exactly.

 For a normal installation, please note that the

connections for the control knobs and the extraction

system [3] are at the front.