Installation and Operation Guide

EN
12
Device description
www.bora.com
4.3.2 Temperature ranges
The power output of the Tepan stainless steel grill heats
food extremely quickly. To avoid burning food, slight
adjustment is needed in comparison to conventional
cooking systems when selecting the temperature.
Activity Temperature
in °C
Steaming fruit, e.g. apple slices, peach halves,
banana slices
160 – 170
Browning chopped vegetables, fried eggs, veal,
poultry
180 – 190
Browning breaded or battered fish, pancakes,
sausages, pork, lamb
190 – 200
Browning potato fritters, prawns, corn on the
cob and escalopes
200 – 210
Searing beef, fish, meatballs 220 – 230
Tab. 4.2 Temperature recommendations
The specifications provided in the table are standard
values.
Low temperature ranges
Additional power levels are available in the low
temperature range.
4.3.3 Cleaning function
The cleaning function
c
brings the Tepan stainless steel
grill to an optimum temperature for cleaning (70°C).
4.3.4 Power setting
The two grilling zones are equipped with a power-
enhancing power setting.

P
appears on the control knob display.
The power setting can be used to quickly heat up large
quantities of water. If the power setting is activated,
the grilling zones will run at extra high power. After
10 minutes, the grilling zone is automatically switched
back to power level
9
.
If the bridging function is activated, the power setting
cannot be used.
INFO Never use the power setting to heat up oil,
fat and the like. The bottom of the pan can
overheat due to the high power output.
4.3.5 Bridging function
The two grilling zones can be operated as a connected
grilling zone at the same power level.

%
appears on the display.
The bridging function is suitable for heating food in a
roaster.
Unit Display Meaning
Control knob
display
e.g. 190 Temperature display
P
Power setting
%
Bridging function
H
Residual heat display: the grilling
zone is switched off but still hot
(temperature > 50°C)
t
Timer function: short-time timer
(egg timer)
L
Childproofing feature
I I
Pause function
c
Cleaning function and extended
temperature range
C
Configuration menu
0
Appliance switched off
E
...
Error message
(see the Troubleshooting section)
Tab. 4.1 Display meaning
Knob operation
Each grilling zone has its own control knob. The
temperature and functions of the two grilling zones are
controlled by turning the selector ring and touching the
touch-operated area (see the Operation section).
INFO The temperature is shown on the control knob
display by default (target temperature and actual
temperature). The configuration menu can be
used to switch the display to a power display or
mixed display (see the Installation section).
4.3 Functional principle
There are two heating elements under each grilling
zone. When the grilling zone is switched on, the heating
element generates heat that heats up the grill surface
directly.
4.3.1 Power control
The power is controlled using power levels, which are
indicated in °C on the control knob display by default
(temperature display).
Alternatively, the configuration menu can be used to
switch the control knob display to a power display or
mixed display.