User Manual

EN
23
Functions and operation
www.bora.com
1
2
3
Fig. 6.8 Activating the automatic extractor function
XO
The automatic extractor function is activated.
XO
A
is shown in the control knob display.
If the power level is changed on one of the connected cooktops,
the extractor power level is automatically adjusted after a slight
delay.
If all connected cooking zones are switched off or paused, the
automatic after-run function will start after a slight delay.
i
The automatic extractor function is permanently activated
and remains active each time the system is started up
until it is deactivated.
Deactivating the automatic extractor function
XX
Open the cooktop extractor function menu.
XX
Do the following:
1
2
3
Fig. 6.9 Deactivating the automatic extractor function
XO
The automatic extractor function is deactivated.
XO
0 is shown in the control knob display.
6.4.2 Short-time timer/egg timer
(system function)
The short-time timer emits both a visual and an acoustic signal
after a time set by the user and provides the function of a
conventional egg timer.
Function Times that can be set in minutes
Short-time timer
(egg timer)
0 – 120
(1, 2, 3, ..., 19, 20, 25, 30, ..., 115, 120)
Tab. 6.4 Times that can be set on the short-time timer
There is a total of 5 additional functions to choose from:
Menu
item
Function System
function
Cooktop
extractor
function
1 A
Automatic extractor function
3
2 t
Short-time timer (egg timer)
3
3 C L
Childproofing feature
3
4 C
Extractor cleaning
3
5 F
Show and reset filter status
3
Tab. 6.2 Overview of cooktop extractor function menu
Calling up the function menu
Fig. 6.7 Calling up the cooktop extractor function menu
XX
Touch the cooktop extractor control knob
XO
The function menu is opened.
XO
The first menu item is shown in the control knob display.
6.4.1 Automatic extractor function
The extractor power level automatically adjusts itself depending
on the current cooktop settings. No manual adjustment of the
fan controls is necessary but it is possible. The extractor power
is automatically adjusted to the highest power level used on all
cooking zones that are currently in use.
Function Power levels
Cooking level 1 2 3 4 5 6 7 8 9 P
Extractor power 2 3 4 5 6 7 8 9 9 P
Tab. 6.3 Cooking levels and assigned extractor power level when
the automatic extractor function is active
If the power level of a cooking zone is changed, the automatic
extractor function automatically adjusts the extractor power
level after a time delay of...
XO
...10 seconds (cooktops PKFI3, PKI3, PKIW3).
XO
...20 seconds (cooktops PKC3, PKCB3, PKCH3, PKT3)
Activating the automatic extractor function
XX
Open the cooktop extractor function menu.
XX
Do the following: