Installation Guide

EN
6
Safety
www.bora.com
2  Safety
2.1  General safety instructions
INFO  The appliance complies with the 
stipulated safety requirements. The 
user is responsible for appliance 
cleaning and maintenance as well as 
its safe use. Improper use can lead 
to personal injury and damage to 
property.
The operating and installation instructions 
contain important information about 
installation and operation. These enable you 
to protect yourself against injuries and 
prevent damage to the appliance. Contact 
details for further information as well as 
application and usage questions can be found 
on the back.
The term “appliance” is used to refer to 
cooktops, cooktop extractors or cooktops 
with integrated cooktop extractor.
 Read the operating and installation 
instructions fully before using the appliance 
for the first time.
 Always store the operating and installation 
instructions within easy reach so that they 
can be accessed if required.
 Pass the operating and installation 
instructions to the next owner if you sell the 
appliance.
 Conduct all work extremely attentively and 
conscientiously.
 Check the appliance for visible damage when 
unpacking it.
 Do not connect a damaged appliance.
 Do not connect the appliance to the mains 
until the duct system has been installed or 
the recirculation filter has been fitted.
 Only use the connection cables supplied in 
the scope of delivery.
 Do not use the appliance until installation is 
complete. This is the only way to ensure safe 
operation.
 Make sure contact with hot cooking surfaces 
is not possible.
 Do not place any objects on the operating 
panel or the cooktop extractor air inlet nozzle.
 Switch off the appliance after use.
 Keep pets away from the appliance.
CAUTION!
Appliance components can cause 
injury if dropped!
Appliance components such as pan 
supports, operating controls, covers, 
grease lters, etc. can cause injury if 
dropped.
 Place any appliance components 
that have been removed in a safe 
place near the appliances.
 Ensure that no components removed 
from the appliance can fall on the 
floor.
Unauthorised modifications
Unauthorised modifications can cause the 
appliance to pose risks.
 Do not make any changes to the appliance.
2.2  Safety information for 
installation
The appliance must only be installed and 
assembled by trained specialists who are familiar 
with and comply with the standard national 
regulations and supplementary regulations of the 
local utility companies.
Work on electrical components must be 
conducted by trained electrical personnel.
The electrical safety of the appliance is only 
guaranteed if it is connected to a protective 
conductor system that has been installed in line 
with regulations. Ensure that this basic safety 
precaution is met.
 Check the appliance for visible damage prior 
to installation.
 Do not install any damaged appliance. 
A damaged appliance may put your safety at 
risk.
Repair and maintenance work may only be 
carried out by specialists authorised by the 
manufacturer.










