User's Manual

EN
35
Operation
www.bora.com
Activating the short-time timer (egg timer)
 Once you have confirmed the time set, you have
3 seconds to turn the knob ring to the 12 o’clock
position.

This activates the short-time timer and the time starts
to count down.

The control knob display shows the remaining time
(accurate to the minute for more than 2 minutes and
accurate to the second for under 2 minutes).

At the end of the time, a beep sounds for 2 minutes
and knob display shows
0
0
0
.

The flashing and the beeping can be stopped by
pressing the touch surface.
Switching off the short-time timer (egg timer) early:
 Press the touch surface of the knob ring.

The short-time timer is deactivated early.

The control knob display shows
0
and a beep sounds.
6.3.6 Pause function
Activating the pause function
 Press the touch surface of the control knob for
1 second.

A beep can be heard and the control knob display
shows
1 1
.

The cooking session is interrupted.
INFO The cooking session can be paused for a
maximum of 10 minutes. If the pause function is
not deactivated in this time, the relevant cooking
zone is switched off.
Deactivating the pause function
 Press the touch surface of the control knob for
1 second.

A beep sounds and the power level selected is shown
on the control knob display.

The cooking session continues.
6.3.7 Switching off the cooking zone
INFO If the control knob display shows
H
, the cooking
zone is still hot.
Fig. 6.4 Switching o the cooking zone
 Turn the knob ring to the 12 o’clock position

A beep sounds and the cooking zone is deactivated.

The cooktop is switched off when there are no longer
any active cooking zones.
 Pay attention to the residual heat display (see Device
description chapter).