User's Manual

Installation

www.bora.com

10 - 40

Fig. 5.9 Surface mounting cut-out

Cut-out dimensions when installing cooktops or cooktops

and the cooktop extractor next to each other:

Cooktops/cooktop extractor B in mm

1/0 346

1/1 457

2/1 828

3/2 1310

4/2 1681

Tab. 5.3 Cut-out dimensions for surface mounting of appliance

combinations

5.5 Installing the cooktop

INFO Clearance of one millimetre should be planned

between the built-in appliances.

INFO A clearance of two millimetres should be planned

around the built-in appliances.

INFO It is recommended to install a mounting rail

between adjacent cooktops (mounting rail PZMS

available as an accessory).

INFO Alternatively, the cooktop can be fitted rotated by

180°.

7 +0,5

10 - 40

Fig. 5.7 Groove dimensions for ush installation

Cut-out dimensions when installing cooktops or cooktops

and the cooktop extractor next to each other:

Cooktops/cooktop extractor A in mm B in mm

1/0 374 346

1/1 485 457

2/1 856 828

3/2 1338 1310

4/2 1709 1681

Tab. 5.2 Cut-out dimensions for ush installation of appliance

combinations

5.4.2 Surface mounting

B ±2

≤ R5

≥ 74

(≥ 70)

516 ±2

≥ 700

Fig. 5.8 Cut-out dimensions for surface mounting