User's Manual

EN
15
Device description
www.bora.com
INFO The temperature information on the heat retention
levels can differ as they are influenced by the
cookware, the fill level, the different types of gas
and gas pressures. The temperature information
can also vary due to the influence of the cooktop
extractor.
4.3.6 Timer functions
There are two different timer functions for each cooking
zone.

t
appears in the control knob display.
INFO You can set a time range of between 1 and
120 minutes for the timer functions.
Timer function
INFO The timer function is an automatic cut-off which
automatically switches off a cooking zone which
is in use.
Short-time timer (egg timer)
INFO The short-time timer requires the cooking zone to
be switched off and works like a conventional egg
timer.
4.3.7 Pause function
The cooking session can be temporarily interrupted (max.
10 minutes).

1 1
appears in the control knob display.
4.4 Safety devices
4.4.1 Safety thermocouple
The gas burners are equipped with a safety thermocouple.
This thermocouple monitors the burner flame when the
gas supply is active. If the burner flame accidentally goes
out, it is automatically reignited by the device. If reignition
is not possible, the gas supply is permanently stopped.
4.4.2 Residual heat display
INFO While
H
is displayed in the control knob display
(residual heat display), do not touch the cooking
zone or place any heat-sensitive objects on top of
it. Risk of burns and fire!
After switching it off, the cooking zone remains hot.
H
appears in the control knob display (residual heat
display). The display goes out after a sufficient cooling
time (temperature < 60 °C).
4.3.3 Power setting
The two cooking zones are equipped with a power-
enhancing power setting.

P
appears on the control knob display.
The power setting can be used in order to quickly heat up
large quantities of water. If the power setting is activated,
the cooking zone will run at extra high power. After
10 minutes, the cooking zone is automatically switched to
power level
9
.
INFO Never heat up oil, fat and the like at this power
setting. The bottom of the pan can overheat due
to the high power output.
4.3.4 Automatic heat up function
The two cooking zones are equipped with an automatic
heat up function that can be switched on and off.

A
appears in front of the power level on the control
knob display.
This function enables the cooking zone to work at full
power for a certain duration after switching on. After this
time, the power level is automatically switched back to
the power level set.
Power level Cooking duration in min:sec
1
00:40
2
01:00
3
02:00
4
03:00
5
04:20
6
07:00
7
02:00
8
03:00
Tab. 4.4 Overview of the automatic heat up function
4.3.5 Heat retention levels
The heat retention level keeps cooked foods warm.

v
appears in the control knob display.

The maximum duration for the warming function is
limited to 8 hours.
There are three different heat retention levels:
Heat retention level Symbol Temperature
1
,
40° C
2
:
55° C
#
3
*
70° C
Tab. 4.5 Heat retention levels