User Manual

EN
44
Menu
www.bora.com
7.3.10 Menu item A:
Show the recirculation filter service
life (only in recirculation mode)
INFO The maximum service life of the recirculation
filter is defined by the filter type configured in the
system.
INFO The remaining filter service life is shown to the
exact hour in the multi-function display and also
on the slider by the colours green, orange and
red.
Indicator:
Remaining
service life
Colour Meaning
> 20 h Green filter change not yet required
5 – 20 h Orange filter change due soon
< 5 h Red Filter must be changed (very soon)
Tab. 7.2 Recirculation lter service life indicator
Fig. 7.12 Menu item A: Show the recirculation lter service life
INFO If the service life of the activated charcoal filter is
exceeded, the correct functioning of the system
may be affected. It is still possible to use the
cooktop extractor, however, the warranty and
guarantee claims shall then be invalid.
7.3.9 Menu item 9:
Data export
INFO Data export makes error analysis easier.
INFO A USB stick with FAT32 formatting is needed
to save the exported data. This USB stick must
be inserted into the USB port on the cooktop
extractor.
INFO Data is exported in three stages. The stages of
the three processes can be seen in the operating
panel display as in the “software update” (see
Menu item 8).
Start data export
Fig. 7.11 Menu item 9: Data export
 Insert the formatted USB stick into the USB port.
 Tap the slider

Data export is initiated.

The indicator for the first part of the export process
flashes.
INFO If the data export is completed without errors, all
three segments will light up green.
INFO If an error occurs during data export (the
corresponding slider segment lights up red), the
data export is terminated. An error message
appears in the operating panel display (e.g.
E
1
2
3
;
see Troubleshooting chapter).