User Manual

EN
37
Operation
www.bora.com
6.5.7 Bridging function
INFO When the bridging function is active, both cooking
zones on the appliance are coupled and operate
at the same cooking level.
INFO When the bridging function is active, the power
setting
ßp
cannot be used on cooktops CKFI, CKI,
CKIW, CKCH or CKCB. Use of the power setting
ßp
is possible on the Tepan stainless steel grill.
INFO On cooktop CKCB the second ring in the rear
cooking zone is automatically activated when the
bridging function is activated.
Activating the bridging function
 Tap on a cooking zone
 Tap the bridging button

The bridging function is now active.

The bridging symbol lights up.

The second cooking zone is activated and operated on
the same power level.

Both cooking zone indicators show the same power
level.

Active additional cooking zone functions are adopted.

Changes to the power level now apply simultaneously
to both cooking zones.
INFO If both cooking zones on a cooktop are already
active, the bridging function cannot be activated.
The bridging function can be activated if no or one
cooking zone is activated.
Deactivating the bridging function
 Tap a cooking zone with an active bridging function
 Long press on the bridging button

The bridging function is deactivated.

The selected cooking zone remains active.
or
 long press on the cooking zone with active bridging
function or long press on the bridging button

The bridging function is deactivated.

All cooking zones are deactivated.
INFO If no suitable cookware is detected (pan size
recognition) within 10 seconds on induction
cooktops with the bridging function active, the
bridging function will be disabled and the cooking
zones will be deactivated.
Activating the power setting for a cooking zone
 Tap the required cooking zone
 Tap on when power level 9 is active
or
 long press on the top end of the slider
(slider position 7-9).
or
 swipe to power level 9 and hold the position

An animation appears in the slider.

ßp
appears in the cooking zone display (flashing 3x at
first and then continuous).
INFO After 10 minutes, the power setting is
automatically switched back to power level 9.
Exception: On gas cooktop CKG the power setting
is limited to 20 minutes.
Deactivating the power setting
The power setting is deactivated early if another power
level is set (see Setting the power level).
6.5.6 Two-ring connection on cooktops
CKCH and CKCB
INFO The two-ring connection can also be activated
or deactivated when the heat-up, timer and
heat retention functions are active. When the
bridging function is activated, the second ring is
automatically activated.
Requirements for two-ring connection:

Cooking session with a power level >0
Activating the second ring
 Tap the required cooking zone
 Adjusting the power level
 Tap the ring button

The second ring is activated in the chosen cooking
zone.

The cooking session is continued at the set power level
with two active rings.

The ring symbol is shown next to the cooking zone
indicator.
Deactivating the second ring
 Tap the required cooking zone
 Long press on the ring button

The second ring is deactivated.

The cooking session is continued at the set power level
with only one active ring.