Installation and Operation Guide

Installation

www.bora.com

Establishing the power connection

 Switch off the main switch/automatic circuit breaker

before connecting the cooktop.

 Secure the main switch/automatic circuit breaker

against being switched back on without permission.

 Make sure the power to the appliance is disconnected.

 Connect the mains cable.

 Only connect the cooktop using a permanent

connection to a power supply cable.

N PE

220 - 240 V~

Fig. 5.12 Connection diagram 1-phase

 Check that the cooktop has been correctly installed.

 Switch on the main switch/automatic circuit breaker.

 Put the cooktop into operation (see the Operation section).

 Check that all the functions are working correctly.

5.7 Handover to user

Once installation is complete:

 Explain the main functions to the user.

 Explain all safety-related aspects of operation and

handling to the user.

 Provide the user with the accessories and operating

and installation instructions for safe storage.