User Manual
EN
21
Operation
www.bora.com
6.1.11 Using the timer function
You can use 2 timer functions:
Short-time timer (egg timer), no automatic switching
off of a cooking zone.
Automatic cut-off for automatically switching off a
cooking zone.
You can set a time range of between 1 and 99 minutes for
both timer functions.
If you press first, 1 minute will be pre-set as the
starting time.
If you press first, 30 minutes will be pre-set as the
starting time.
Switching off the timer signal tone
Press any sensor button on the operating panel to end
the signal tone prematurely.
Setting the short-time timer (egg timer)
You can set a short-time timer for each cooking zone.
INFO The active cooking zone indicator shows
that the short-time timer is activated.
The remaining time is displayed.
After the end of the time set, 00 will be displayed for a
few seconds on the timer display. A signal tone will sound
for a few seconds.
Prerequisite
The cooktop must be switched on.
Press the timer button or .
Each indicator light will blink and
00
will appear in the
cooking zone indicator.
Press or to set the required time.
Activation will take place within 10 seconds of the
button last being pressed.
If the cooktop is switched off with the on/off button
, the cooking zone indicator will become active and
the remaining time will be displayed.
Changing the timer settings
Press to switch on the cooktop.
The timer indicator light blinks.
Press or to set the required time.
6.1.8 Bridging function
If the bridging function is active, both cooking zones
will operate at the same time on the same cooking
zone.
Switching on the bridging function
Prerequisite
Press to switch on the cooktop.
Press both the buttons on the cooktop
(within 10 seconds).
The left cooking zone indicator will show the symbol
%
,
indicating that the bridging function is activated.
0
is
displayed in the right cooking zone indicator.
Set the desired power level with the or button
on the back cooking zone.
Switching off the bridging function
Press both buttons on the cooktop.
Both cooking zone indicators will display
0
.
Press to switch off the cooktop.
6.1.9 Automatic heat up function
Switching on the automatic heat up function
Prerequisite
The cooktop is switched on.
All cooking zones are switched off.
Press the and buttons on the cooktop.
Press the button (within 5 seconds) to select the
desired power level (continuous cooking stage), which
should be used to continue the cooking session after
the end of the automatic heat up function.
The cooking zone indicator will display the symbol
A
to
show that the automatic heat up function is activated
as well as the continuous cooking stage set, for
example
5
.
Switching off the automatic heat up function
The activated automatic heat up function will end
prematurely if you
press the button on the cooking zone.
set power level
9
.
activate the power setting
P
.
activate the heat retention level
v
.
switch off the cooktop by pressing the button.
6.1.10 Heat retention level
A cooking zone is in use.
Power level
1
is activated.
Press to set the heat retention level
v
.
The cooking zone will automatically switch off after
2 seconds.