User Manual

EN
15
Device description
www.bora.com
4.4.3 Overheating protection
The device is fitted with overheating protection.The
overheating protection can be triggered if:

Cookware is heated up empty.

Oil or fat is heated on high power.

A hot cooking zone is switched on again after a power cut.

There is insufficient ventilation below the cooktop (see
Cooktop air intake).
Before the overheating damages the electronics, one of
the following measures is taken:

The power level can no longer be increased.

The power level set is reduced.

The cooktop switches off completely.
After a sufficient cooling period, the cooktop can be used
again in full.
4.4.4 Automatic switch-off if the button is
pressed and held
The cooktop will be switched off automatically when
one or more sensor buttons are touched for longer than
10 seconds (finger contact, objects, soiling).

The display shows
/
.

After a few seconds, the cooktop will switch off.
 Remove the finger or object from the cooktop.
 Clean the cooktop as required.
 Where necessary, switch the cooktop back on.
4.4.5 Child safety lock
The child safety lock prevents the cooktop from being
switched on automatically. The child safety lock can only
be activated when the cooktop is switched on and all
cooking zones have been switched o (see the Operation
chapter).