Datasheet

20.02.2020
Bopla Gehäuse Systeme GmbH | Borsigstr. 17-25, 32257 Bünde
Tel.: [phone] / 969 - 0 | E-Mail: [e-mail] | Internet: www.bopla.de
Euromas Polymas
Enclosure with a moulded-on Pg 11
PK 101-111
Order no.: 38101100
* = Available on request.
Characteristics
Colour of enclosure group
silver-grey
Protection class
IP 65
Enclosure Material
PA 6-GB 30, seal made of CR; for details see Technical
Information
Scope of delivery
Lid and base, lid screws made of V2A, 1 moulded-on cable gland,
Pg 11 including clamping cage, pressure screw and continuous
sealing ring
Note
G = Model with crystal clear lid.
Dimensions
Dimensions
58 x 64 x 34 mm
Product drawing
Important!
To compensate for pressure when temperatures change and cause moisture in the enclosure, we we recommend that you use a
pressure compensation element.
» Additional information
Technical documentation / Downloads
Technical drawings
3D product data in STEP format: Registration necessary
Product information
Euromas Polymas GB.pdf (306.5 KB)