Datasheet

20.02.2020
Bopla Gehäuse Systeme GmbH | Borsigstr. 17-25, 32257 Bünde
Tel.: [phone] / 969 - 0 | E-Mail: [e-mail] | Internet: www.bopla.de
Ultramas
Rear panels, 2 mm, natural-coloured anodised aluminium
FP 30018
Order no.: 56031800
For UM 3..09 + 1x AB 02.09 (L) and for UMP 32018 (FP)
* = Available on request.
Characteristics
Colour of enclosure group
Signal red
Enclosure Material
ABS; for details see Technical Information
Scope of delivery
1 rear panel
Important!
To compensate for pressure when temperatures change and cause moisture in the enclosure, we we recommend that you use a
pressure compensation element.
» Additional information
Technical documentation / Downloads
Technical drawings
3D product data in STEP format: Registration necessary
Product drawing in PDF format: 56031800 FP-30018.pdf (62.9 KB)
Product drawing in DXF format: 56031800 FP-30018.dxf (334.4 KB)
Drawing for mechanical processing: 56031800 FP-30018-G.dxf (248.4
KB)
Milling contours are shown here as a DXF file. (Sub D, USB, HDMI, cable
glands, ...)
Product information
Ultramas GB.pdf (368.7 KB)